If you have a dog that likes to bark, and particularly if your dog loves to play in the backyard and other areas of the house, you will need to get them some particular dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up which will look a little scary at first, but it’s really very simple. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape from the cardboard, so you’ll need to cut around the edge of the mask so that you get something that looks like a cone. The main thing here is to be realistic with what kind of paper plate which you’re using.
Then you’ll have to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so that you can make certain that nothing will leak once you put the mask on. Make sure that the edges are cut so that the edges aren’t sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You will want to start with one side of the mask first, so that you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.
Don’t fret too much about the paint getting stuck to your mask. It’s easy to eliminate it later, and it will leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wash away any excess paint after you are done, so that you don’t wind up with smudges or smears on your dog.
Then it’s time to paste the mask on your dog’s head. First you will need to be certain that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you can start to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the foundation of the mask http://www.arctarim.com/the-best-cheap-dog-food-finding-the-right-type-of-cheap-dog-food/ and fold it over. Be sure that it’s quite powerful and then use your hands to ensure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you have the mask snugged securely onto the face of your dog. Don’t make the folds too large or else it might look messy. As soon as you’ve completed this, you can then take out the mask and attach the cardboard ears. And attach the other part of the mask onto the dog. Make certain the ears are flat and make sure that it’s not too short or long as this will cause some issues with the mask slipping off the dog’s face.
If you are using a dog mask because your dog protection, you will have to do some sanding to be sure that it is safe on your dog. You can do this by sanding off any excess paper which might have been eliminated from your mask.